 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Ordering number:ENN926C PNP/NPN Epitaxial Planar Silicon Darlington Tranasistors 2SB882/2SD1192 Driver Applications Applications * Motor drivers, printer hammer drivers, relay drivers, voltage regulator control. Package Dimensions unit:mm 2010C [2SB882/2SD1192] 10.2 3.6 5.1 2.7 6.3 Features * High DC current gain. * High current capacity and wide ASO. * Low saturation voltage. 18.0 4.5 1.3 5.6 1.2 0.8 14.0 15.1 0.4 1 2 3 2.7 ( ) : 2SB882 Specifications Absolute Maximum Ratings at Ta = 25C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP PC Tj Tstg Tc=25C 2.55 2.55 1 : Base 2 : Collector 3 : Emitter SANYO : TO-220AB Conditions Ratings (-)70 (-)60 (-)6 (-)10 (-)15 1.75 40 150 -55 to +150 Unit V V V A A W W C C Electrical Characteristics at Ta = 25C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Symbol ICBO IEBO hFE fT VCE(sat) VBE(sat) VCB=(-)40V, IE=0 VEB=(-)5V, IC=0 VCE=(-)2V, IC=(-)5A VCE=(-)5V, IC=(-)5A IC=(-)5A, IB=(-)10mA IC=(-)5A, IB=(-)10mA 2000 5000 20 0.9 (-)1.0 (-)2.0 (-)1.5 MHz V V V Conditions Ratings min typ max (-)0.1 (-)3.0 Unit mA mA Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN D1002AS (KT)/91098HA (KT)/10996TS (KOTO) 8-4329/D251MH/4067KI/2045MW, TS No.926-1/4 2SB882/2SD1192 Continued from preceding page. Parameter Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Turn-ON Time Storage Time Fall Time Symbol V(BR)CBO IC=(-)5mA, IE=0 V(BR)CEO IC=(-)50mA, RBE= ton tstg tf See specified Test Circuit See specified Test Circuit See specified Test Circuit Conditions Ratings min (-)70 (-)60 (0.5) 0.6 (1.5) 3.0 (1.7) 1.8 typ max Unit V V s s s s s s Switching Time Test Circuit PW=50s, Duty Cycle1% 500IB1= --500IB2=IC=5A TUT INPUT RB RL 4 50 VR + 100F VBE= --5V + 470F VCC=20V Electrical Connection C OUTPUT C B 6k 200 B 6k 200 E E 2SB882 2SD1192 (For PNP, the polarity is reversed.) --12 IC -- VCE From top --5.0mA --4.5mA --4.0mA --3.5mA --3.0mA --2.5mA 2SB882 14 IC -- VCE From top 5.0mA 4.5mA 4.0mA 3.5mA 3.0mA 2SD1192 --10 12 Collector Current, IC - A --8 --2.0mA --1.5mA --1.0mA --0.5mA Collector Current, IC - A 10 8 2.5mA 2.0mA 1.5mA --6 6 1.0mA 4 --4 0.5mA 2 --2 0 0 --0.5 --1.0 --1.5 --2.0 --2.5 --3.0 --3.5 IB=0 --4.0 --4.5 --5.0 0 0 0.5 1.0 1.5 2.0 2.5 IB=0 3.0 3.5 4.0 4.5 5.0 Collector-to-Emitter Voltage, VCE - V ITR08549 --12 Collector-to-Emitter Voltage, VCE - V 12 ITR08550 IC -- VBE 2SB882 VCE= --2V IC -- VBE 2SD1192 VCE=2V --10 10 Collector Current, IC - A --8 Collector Current, IC - A 8 20C 0C Ta= 12 --6 6 25 C --4 --40 C 4 --2 2 0 --0.4 --0.6 --0.8 --1.0 --1.2 --1.4 --1.6 --1.8 --2.0 --2.2 0 0.4 0.6 0.8 1.0 Ta= 1 1.2 1.4 1.6 --40C 1.8 2.0 25C 2.2 2.4 Base-to-Emitter Voltage, VBE - V ITR08551 Base-to-Emitter Voltage, VBE - V ITR08552 No.926-2/4 2SB882/2SD1192 5 3 2 hFE -- IC 2SB882 VCE= --2V DC Current Gain, hFE C 20 a=1 T 5 3 2 10000 7 5 3 2 1000 7 5 3 2 100 hFE -- IC 2SD1192 VCE=2V 20 C DC Current Gain, hFE 10000 7 5 3 2 1000 7 5 3 2 100 5 7 --0.1 2 C 25 1 Ta= 25 C --40 C --40 C 3 5 7 --1.0 2 3 5 Collector Current, IC - A --100 7 5 7 --10 2 ITR08553 100 5 7 0.1 2 3 5 7 1.0 2 3 5 7 Collector Current, IC - A 2 10 ITR08554 VCE(sat) -- IC 2SB882 IC / IB=500 VCE(sat) -- IC 2SD1192 IC / IB=500 7 Collector-to-Emitter Saturation Voltage, VCE (sat) - V 3 2 --10 7 5 3 2 --1.0 7 5 Collector-to-Emitter Saturation Voltage, VCE (sat) - V 5 3 2 10 7 5 3 2 25C 120C 2 3 Ta= --40C 1.0 7 5 3 0.1 25C 120C 2 3 Ta= --40C 3 --0.1 5 7 --1.0 2 3 5 Collector Current, IC - A --100 7 5 7 --10 2 ITR08555 5 7 1.0 2 3 5 7 Collector Current, IC - A 100 2 10 ITR08556 VBE(sat) -- IC 2SB882 IC / IB=500 VBE(sat) -- IC 2SD1192 IC / IB=500 7 5 Base-to-Emitter Saturation Voltage, VBE (sat) - V 3 2 --10 7 5 3 2 --1.0 7 5 --0.1 Base-to-Emitter Saturation Voltage, VBE (sat) - V 3 2 10 7 5 3 2 1.0 7 5 0.1 25C 120C 2 3 Ta= --40C 25C 120C 2 3 Ta= --40C 5 7 --1.0 2 3 5 Collector Current, IC - A 3 2 --10 7 5 3 2 --1.0 7 5 3 2 --0.1 7 5 3 2 2 7 --10 2 ITR08557 5 7 1.0 2 3 5 7 Collector Current, IC - A 3 2 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 2 10 ITR08558 ASO 15 ASO ICP=15A IC=10A 10 ICP=-15A 2SB882 Collector Current, IC - A 2SD1192 Collector Current, IC - A IC=-10A 10 m m 1m s 1m DC s s s op DC 10 10 0m s er ati op 0m on er ati s on Tc=25C 1ms to 100ms : single pulse 3 5 7 --10 2 3 5 67 Collector-to-Emitter Voltage, VCE - V --100 ITR08559 2 3 5 7 10 2 3 5 67 Collector-to-Emitter Voltage, VCE - V 100 ITR08560 No.926-3/4 2SB882/2SD1192 2.0 1.75 PC -- Ta 2SB882 / 2SD1192 50 PC -- Tc 2SB882 / 2SD1192 Collector Dissipation, PC - W Collector Dissipation, PC - W 0 20 40 60 80 100 120 140 160 1.6 40 1.2 30 0.8 20 0.4 10 0 0 0 20 40 60 80 100 120 140 150 160 ITR08562 Case Temperature, Tc - C ITR08561 Ambient Temperature, Ta - C Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of December, 2002. Specifications and information herein are subject to change without notice. PS No.926-4/4 |
Price & Availability of 2SB882
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |